TRB will conduct a webinar on Thursday, April 20, 2017 from 2:00 PM to 3:30 PM ET that features research from the National Cooperative Highway Research Program
(NCHRP)’s Report 818
: Comparing the Volumetric and Mechanical Properties of Laboratory and Field Specimens of Asphalt Concrete.
This webinar will discuss how to evaluate the causes and magnitude of variability of specimen types tested in quality control and/or assurance programs for asphalt paving projects. The presenters will describe a proposed practice for evaluating several different types of asphalt concrete.
Participants must register in advance of the webinar, and there is a fee for non-TRB Sponsor or non-TRB Sustaining Affiliate employees. A certificate for 1.5 Professional Development Hours (PDHs) will be provided to attendees who register and attend the webinar as an individual.
- Louay Mohammad, Louisiana State University
- Samuel Cooper III, Louisiana Department of Transportation and Development
Moderated by: Ed Harrigan, Transportation Research Board
- Overview of NCHRP project
- Proposed practice for evaluating the cause and magnitude of variability of specimen types
Question and answer session
- Laboratory mixed and compacted
- Plant mixed, laboratory compacted
- Plant mixed, field compacted
The first 60 minutes of the webinar will be for presentations and the final 30 minutes will be reserved for audience questions. The Registered Continuing Education Program (RCEP) categorizes this webinar activity as relating to health, safety, and welfare including core technical.
At the end of this webinar, participants will be able to:
- Describe causes of variability and tolerances for volumetric and mechanical properties of dense-graded asphalt mixtures measured within and among the specimen types (laboratory-mixed and compacted; plant-mixed, laboratory-compacted; plant-mixed and field-compacted)
- Identify the proposed practice for evaluating the cause and magnitude of variability within and among the specimen types
- Apply the conversion factors between the specimen types of mechanical properties evaluated
There is no fee for employees of TRB Sponsors
or TRB Sustaining Affiliates
who register using their work email address. In addition to employees of TRB sponsor organizations, the following are eligible to receive complimentary webinar registration:
- TRB and National Academies employees;
- Chairs of TRB standing committees, sections, or groups;
- CRP panel members who were involved with developing the report or project that is the subject of the webinar;
- Members of the media;
- Employees of tribal governments; and
- Members of Congress or their staff.
Other sites must pay $95 per site. View our pricing page
After registering you will receive a confirmation email containing information about joining the webinar.
Professional Development Hour Information
A certificate for 1.5 Professional Development Hours (PDHs) will be provided to Professional Engineers (PEs) who register and attend the webinar as an individual. For groups, only the person that registers and attends the session will receive a PDH certificate.
Individuals registered as Florida PEs are no longer required to email TRB with your license number to report your attendance. Instead, please use your certificate that TRB provides through RCEP.net as verification of your attendance to the Florida Board of Professional Engineers.
Please check with your licensing board to ensure that TRB webinar PDHs are approved by your board.
This webinar was developed in October 2016. TRB has met the standards and requirements of the Registered Continuing Education Program (RCEP). Credit earned on completion of this program will be reported to RCEP by TRB. Certificates of Completion will be issued to individuals who register for and attend the entire webinar session. Complaints about registered providers may be sent to RCEP, 1015 15th Street, NW, 8th Floor, Washington, DC 20005. Website: www.RCEP.net.
Registration questions? Contact Reggie Gillum at RGillum@nas.edu
This Summary Last Modified On: 3/17/2017